Breaker chisel paste, 400 g
Genuine Epiroc chisel paste for the KM55 hydraulic breaker.
Delivered with your machine and handed over at delivery. No separate delivery charge.
Order with your hire. Stock checked at booking.
Safety: Push the tool fully in before greasing. The tool gets very hot: let it cool first.
What it's for
Greasing the breaker's tool and bushing every 2 hours of breaking.
Why we recommend it
The breaker manual says to grease every second hour, and ordinary grease melts out under the heat. A dry tool wears the bushing fast. Expect about one cartridge every few days of steady breaking.
How much you'll need
Ask the hire desk on 01902 213089.
How to use it
- Stop breaking, rest the tool on the ground and push it fully in.
- Pump paste into the breaker's grease point until it shows round the tool.
- Repeat every 2 hours of breaking.
In the box
- 1 × 400 g Epiroc chisel paste cartridge
Spec
- Epiroc chisel paste
- 400 g cartridge
Questions
Can I use normal grease?
No. Normal grease melts out at breaker temperatures, and the bushing then wears quickly.
Does it fit a normal grease gun?
Yes, it's a standard cartridge.
Often added together
Needed for greasingGrease gun, side leverSide-lever grease gun that takes standard 400 g cartridges. Yours to keep.
£33.00£27.50 ex VAT · each
For breaking concrete or stoneFFP3 dust mask (valved)FFP3 disposable mask for silica dust from breaking and cutting.
£4.74£3.95 ex VAT · each- Work gloves, nitrile palm (pair)
Grippy nitrile-palm gloves for greasing, refuelling and handling.
£2.40£2.00 ex VAT · pair